Lepus MK-1

Lepus Mk2 XT-TK (eXposed Trigger - Talon + Katana) Variant The Lepus is a fully custom designed Nerf blaster that is about as small as you can make it. It uses worker Talon mags and worker hurricane wheels and the compact n20 gear motor for the auto pusher. Why? I wanted a really compact full auto sidearm to be a companion for my caliburn or HPA blaster, using talons meant it was compatible with the mags I already use in my other blasters. Making the mag feed through the handle kept the size small and gave it an Uzi/Mac10 feel. ToDo’s / Ideas Improve triggers (add covers?) Add mag releaseadd compatibility for katanas (dual compatible isn’t possible with this design)make different motor spacing'sMake FTW variant This would have to be a new blasterImprove overhang by flywheel covers on lid Mk 2 Canges Increased the size of the tabs on the back cover Build in mag stop to the FWC Change the motor mounting system from pressure fit to screws Make different crush levels 34.0, 33.5, 33.0mm 32.5mm Added katana compatible grip Improve pusher cam shape Move pusher home position switch Contact me on facebook Hardware you need 2x 130 motors 2x hurricane wheels N20 gear motor 1000 or 1200rpm Small lipo (56x31x11mm) 18awg wire 20 or 22awg wire Heatshrink Mosfet module (including mosfet, diode and resistors) XT30 2x Subminiature micro switch Miniature microswitch 7x M2.6x8mm screw 2x M2.6x10mm screw 4x M2x10mm screw M3 brass insert M3 thumbscrew 2 x M2 motor screws