The Tempest is a 3D printed semiautomatic HPA foam dart blaster designed to use the SUPER cores by Specter's Nerf Workshop. It is compatible with Talon magazines. The on-board adjustable bottle stock removes the need for a remote air line and increases maneuverability. The receiver is secured using 3/16" pins; removing the rear pins allows removal of the internal assembly for maintenance. Operating pressure is adjustable from 40 to 140 PSI. It shoots Worker Gen3 darts at 200fps at 40psi. Parts list: SUPER core 5/8" UNF threaded barrel MJVO-3 Wolverine Storm OnTank Gen2 Regulator 13/3000 HPA tank First Strike Free Floating Stock Bar 2x 1/8" BSPT male to female elbow (McMaster 4860K421) 2x 1/8" BSPT male to male straight connector (McMaster 4860k631) 1x 3x20mm pin (McMaster 91585A390) 4x 3x30mm pin (McMaster 91585a410) 2x 3x36mm pin (McMaster 91585a430) 2x 3/16" adjustable clevis pin (McMaster 98330a125) 2x compression spring (McMaster 9657k266) 1x 3mm threaded insert (McMaster 94180a333) 1x M3x10 socket head screw (McMaster 91290a115)
- Master Blaster List
- CC BY-NC 4.0