3D Printed Blaster By Airzone

This is the HPA FDL3 remix called WTFDL-3 Please note this is an advanced build. You will need to have experience in HPA and ideally familiarity with the FDL3 build process. Please find some technical details here: https://www.reddit.com/r/HPAnerf/comments/ivu1gd/details_on_hpa_fdl3_software_controls/ You will need the same M3 x 43mm bolts to hold the front of the blaster together. Also, you will need a selection of M4 nuts and bolts where nuts are installed, and #6 self tapping screws for the rest of the blaster - in largely the same lengths as the OG FDL3. Regulator is a Polarstar MR. Regulator fits in the OG battery area, and the battery now fits up the top-front cowling. Step files are included just in case you don't want a MCU / Narfduino controlled blaster, or wanna adapt it to a different reg and/or solenoid.

Master Blaster List
CC BY-NC 4.0
Join the Conversation discord.gg/pQWY3Z28tZChat about foam flinging, share suggestions, keep tabs on updates.
DartSweep is not affiliated, associated, endorsed by, or in any way connected with Nerf, Dart Zone or any other brands referenced here. We just like flinging foam, be cool.
ClickTap To Open