3D Printed Blaster By Ahalekelly

A modern reinterpretation of the classic rainbow pistol, designed to dominate high fps pistol rounds. Break action front end is based on Meaker's Mk18 pistol, and accepts Sledgefire and Spring Thunder shells. All stls are oriented in the right print orientation. Hardware: 1.5" OD x 1.38" ID plunger tube. Aluminum recommended, polycarbonate might work but has not been tested AR grip 3/8" square plunger rod with catch notch 2 #123 O rings (same as caliburn) Gasketing foam for the break action Plunger padding and/or a #208 O ring Pen spring for catch Elastic cord for latch 4 front plunger tube screws: 8-32 x 3/8" 4 rear plunger tube screws: 8-32 x 1/4" Plunger head screw, 8-32 x ~1" Latch pivot screw: 6-32 x 5/8" Hinge screw: 8-32 x 1.5" & locknut Trigger pivot screw: 4-40 x 3/8" Grip screw: 10-32 x 1" & nut 2 rear cap screws: M3 x 20mm & nuts

Master Blaster List
Join the Conversation about foam flinging, share suggestions, keep tabs on updates.
DartSweep is not affiliated, associated, endorsed by, or in any way connected with Nerf, Dart Zone or any other brands referenced here. We just like flinging foam, be cool.
ClickTap To Open